Ford Ranger 2 (PX2/PX3) 3500kg GVM Upgrade2024-01-29T08:43:17+08:00
Fully Loaded

Ford Ranger 2 (PX2/PX3) 3500kg GVM Upgrade

West Coast Suspension is authorised under Federal approval number 47899 to supply and fit a GVM suspension upgrade for the Ford Ranger 2 to 3500kg GVM. This enables the operator to legally carry 300kg over the factory stipulated GVM. 

This GVM upgrade has been ESC tested by Bosch Australia and complies with the ADR 35-05 “Sine with Dwell” requirements and fully certified under RVCS (Road Vehicle Certification System) by the federal Dept. of Infrastructure and Regional Development. 

This kit can be fitted to licenced vehicles under the WA state based type approval (TA) system.

Each GVM suspension upgrade is issued with a vehicle compliance plate for TA, fitted next to the OEM compliance plate, stating vehicle particulars and approval number.

For vehicles that have already been licenced, the GVM certification process varies depending on state or territory. The vehicle may be need to be inspected by an authorised Automotive Engineer to comply with that state or territory’s GVM compliance requirements. 

WCS GVM upgrades only increase the Gross Vehicle Mass (GVM).  They do NOT increase the Gross Combined Mass (GCM) or Braked Towing Capacity (BTC).


Please be aware that these kits must be fitted by a WCS approved fitter/manufacturing facility.

Fully Loaded vehicle image

Suspension kit consists of:

  • 2 Front coil springs
  • 2 Rear leaf springs
  • 2 Front struts
  • 2 Rear shock absorbers
  • 4 U-Bolts
  • 1 Shackle bush kit
  • 2 Swinging shackles
  • 2 Fixed pins
  • 1 Centre bearing spacer
  • 1 Silver SSM Compliance plate
  • 1 GVM tyre placard
Fully Loaded