Ford Ranger 2 (PX2/PX3) 3500kg GVM Upgrade (OEM#43280)

West Coast Suspension is authorised under Federal approval number 47899 to supply and fit a GVM suspension upgrade for the Ford Ranger 2 to 3500kg GVM. This enables the operator to legally carry 300kg over the factory stipulated GVM.

This GVM upgrade has been ESC tested by Bosch Australia and complies with the ADR 35-05 “Sine with Dwell” requirements and fully certified under RVCS (Road Vehicle Certification System) by the federal Dept. of Infrastructure and Regional Development.

This kit can be fitted to licenced vehicles under the state-based type approval (TA) system.

Each GVM suspension upgrade is issued with a vehicle compliance plate, fitted next to the OEM compliance plate, stating vehicle particulars and approval number.

For licenced vehicles, the GVM certification process varies depending on state or territory. The vehicle may need to be inspected by an authorised Automotive Engineer to comply with that state or territory’s GVM compliance requirements.

WCS GVM upgrades only increase the Gross Vehicle Mass (GVM).  They do NOT increase the Gross Combined Mass (GCM) or Braked Towing Capacity (BTC).

Variants covered by this GVM Upgrade:

SINGLE CAB 4X2 HI-RIDER
SINGLE CAB 4X4
SUPER CAB 4X2 HI-RIDER
SUPER CAB 4X4
DOUBLE CAB 4X2 HI-RIDER
DOUBLE CAB 4X4

All information relevant to this GVM Upgrade can be found on ROVER listed under the approval number 47899